HANTEKOscilloscopes
Model: Hantek2000
Hantek2000 Series
Price:Price on Request
An all-new handheld oscilloscope-Hantek2000 series, it continues the compact and lightweight concept but with a new generation of 3 in 1 multifunction tester: oscilloscope, signal source and multimeter; A small volume of the non-profit grip by a single hand; The suspendingstand was designed to support multi-angle adjustment; Ultra-low-power, Type C charging interface, each 2 hours battery charge allow working one full day or standbytwo months; High-definition color LCD screen display clear and delicate; Minimalist keyboard design simplifyoperation, easy to use.
Key Specifications
BandwidthHantek2D72: 70MHz | Hantek2D42: 40MHz | Hantek2C72: 70MHz | Hantek2C42: 40MHz
ChannelHantek2D72: 2CH+DMM+AWG | Hantek2D42: 2CH+DMM+AWG | Hantek2C72: 2CH+DMM | Hantek2C42: 2CH+DMM
Sample Rate RangeHantek2D72: 250MSa/s(Single-channel), 125MSa/s(Dual-channel)
Waveform InterpolationHantek2D72: (sin x)/x
BandwidthHantek2D72: 70MHz | Hantek2D42: 40MHz | Hantek2C72: 70MHz | Hantek2C42: 40MHz
ChannelHantek2D72: 2CH+DMM+AWG | Hantek2D42: 2CH+DMM+AWG | Hantek2C72: 2CH+DMM | Hantek2C42: 2CH+DMM
Sample Rate RangeHantek2D72: 250MSa/s(Single-channel), 125MSa/s(Dual-channel)
Waveform InterpolationHantek2D72: (sin x)/x
Record LengthHantek2D72: Max. 6K for single-channel; 3K samples per dual-channel
SEC/DIV RangeHantek2D72: 5ns/div~500s/div 1, 2, 5 sequence
A/D ConverterHantek2D72: 8-bit resolution,each channel sampled simultaneously
VOLTS/DIV RangeHantek2D72: 10mV/div~10V/divat input BNC
Bandwidth Limit, typicalHantek2D72: 20MHz
Low Frequency Response (-3db)Hantek2D72: ≤10Hz at BNC
Rise Time at BNC, typicalHantek2D72: ≤5ns
DC Gain AccuracyHantek2D72: ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div
Acquisition ModesHantek2D72: Normal
TypeHantek2D72: Edge
ModeHantek2D72: Auto, Normal, single
LevelHantek2D72: ±4 divisions from center of screen
Trigger Level AccuracyHantek2D72: 0.2div × volts/div within ±4 divisions from center of screen
SlopeHantek2D72: Rising, Falling, Rising & Falling
SourceHantek2D72: CH1/CH2
CouplingHantek2D72: DC, AC or GND
Input Impedance,Hantek2D72: 25pF±3 pF, 1MΩ±2%
Probe AttenuationHantek2D72: 1X, 10X
Supported Probe Attenuation FactorsHantek2D72: 1X, 10X, 100X, 1000X
Maximum Input VoltageHantek2D72: 150V RMS
CursorHantek2D72: Voltage difference between cursors: △ V
Automatic MeasurementsHantek2D72: Frequency, Amplitude
Waveform FrequencyHantek2D72: Sine: 1Hz~25MHz | Hantek2D42: - | Hantek2C72: -
Square: 1Hz~10MHzHantek2D72: - | Hantek2D42: -
Ramp: 1Hz~1MHzHantek2D72: - | Hantek2D42: -
EXP: 1Hz~5MHzHantek2D72: - | Hantek2D42: -
SamplingHantek2D72: 250MSa/s | Hantek2D42: - | Hantek2C72: -
AmplitudeHantek2D72: 2.5Vpp(50Ω) | Hantek2D42: - | Hantek2C72: -
5Vpp(High impedance)Hantek2D72: - | Hantek2D42: -
Frequency ResolutionHantek2D72: 0.10% | Hantek2D42: - | Hantek2C72: -
Waveform DepthHantek2D72: 512Sa | Hantek2D42: - | Hantek2C72: -
Vertical ResolutionHantek2D72: 12 bit | Hantek2D42: - | Hantek2C72: -
Output ImpedanceHantek2D72: 50 Ω | Hantek2D42: - | Hantek2C72: -
Maximum ResolutionHantek2D72: 4000 Counts
DMM Testing ModesHantek2D72: Voltage,Current,Resistance,Capacitance,Diode &On-Off
Maximum Input CurrentHantek2D72: AC: 10A, DC:10A
Input ImpedanceHantek2D72: 10MΩ
Measurement TermHantek2D72: Range | Hantek2D42: Accuracy | Hantek2C72: Resolution
DC VoltageHantek2D72: 400.00mV | Hantek2D42: ± (0.8% + 5) | Hantek2C72: 100uV
4.000VHantek2D72: 1mV
40.00VHantek2D72: 10mV
400.0VHantek2D72: 100mV
600.0VHantek2D72: ± (1% + 2) | Hantek2D42: 1V
AC VoltageHantek2D72: 4.000V | Hantek2D42: ± (1.2% + 5) | Hantek2C72: 1mV
DC CurrentHantek2D72: 40.00mA | Hantek2D42: ± (1% + 2) | Hantek2C72: 10uA
200.0mAHantek2D72: ± (1.5% + 2) | Hantek2D42: 100uA
4.000AHantek2D72: ± (1.8% + 2) | Hantek2D42: 1mA
10.00AHantek2D72: ± (3% + 2) | Hantek2D42: 10mA
AC CurrentHantek2D72: 40.00mA | Hantek2D42: ± (1.3% + 2) | Hantek2C72: 10uA
400.0mAHantek2D72: ± (1.8% + 2) | Hantek2D42: 100uA
ResistanceHantek2D72: 400.0Ω | Hantek2D42: ±(1% + 3) | Hantek2C72: 0.1Ω
4.000KΩHantek2D72: ±(1.2% + 5) | Hantek2D42: 1Ω
60.00KΩHantek2D72: 10Ω
400.0KΩHantek2D72: 100Ω
4.000MΩHantek2D72: 1KΩ
40.00MΩHantek2D72: ± (1.5%±3) | Hantek2D42: 10KΩ
CapacitanceHantek2D72: 40.00nF | Hantek2D42: ±(3% + 5) | Hantek2C72: 10pF
400.0nFHantek2D72: 100pF
4.000uFHantek2D72: 1nF
40.00uFHantek2D72: 10nF
100.0uFHantek2D72: 100nF
DiodeHantek2D72: 0V~1.0V
On-OffHantek2D72: <50Ω
Display TypeHantek2D72: 2.8 inch64K color TFT
Display ResolutionHantek2D72: 320 horizontal by 240 vertical pixels
Display ContrastHantek2D72: Adjustable
Supply VoltageHantek2D72: 100V-240VAC, 50Hz-60Hz; DC INPUT: 5VDC, 2A
Power ConsumptionHantek2D72: <2.5W
FuseHantek2D72: T, 3A
BatteryHantek2D72: 2600mA*2
Operating TemperatureHantek2D72: 0~50 °C (32~122 °F)
Storage TemperatureHantek2D72: -40~+71 °C (-40~159.8 °F)
HumidityHantek2D72: ≤+104 ℉ (≤+40°C): ≤90% relative humidity
Cooling MethodHantek2D72: Convection
AltitudeHantek2D72: Operating and | Hantek2D42: 3,000m (10,000 feet)
Mechanical ShockHantek2D72: Random Vibration | Hantek2D42: 0.31g RMS from 50Hz to 500Hz, 10 minutes on each axis