HANTEKOscilloscopes
Model: DSO5000B
DSO5000B Series
Price:Price on Request
4-Channel Oscilloscope/16-Channel Logic Analyzer/Spectrum Analyzer/2-Channel Arbitrary Wave Generator/Digital Voltmeter/6-bit Frequency Meter and Accumulator/Protocol Analyzer/Protocol Generator
Key Specifications
Sample RateDSO5202B: Real-Time Sample: 1GS/s Equivalent Sample: 25GS/s
NormalDSO5202B: Normal data only
Peak DetectDSO5202B: High-frequency and randon glith capture
AverageDSO5202B: Wavefom Average, selectable 4,8,16,32,64,128
Sample RateDSO5202B: Real-Time Sample: 1GS/s Equivalent Sample: 25GS/s
NormalDSO5202B: Normal data only
Peak DetectDSO5202B: High-frequency and randon glith capture
AverageDSO5202B: Wavefom Average, selectable 4,8,16,32,64,128
Inputs CouplingDSO5202B: AC, DC, GND
Inpits ImpendanceDSO5202B: 1MΩ±2% ‖ 20pF±3pF
Probe AttenuationDSO5202B: 1X, 10X
Supported Probe Attenuation FactorDSO5202B: 1X, 10X, 100X, 1000X
Maximum Input VoltageDSO5202B: CAT I and CAT II: 300VRMS (10×), Installation Category; CAT III: 150VRMS (1×); Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited t
Sample Rate RangeDSO5202B: 500MS/s--1GS/s
Waveform InterpolationDSO5202B: (sin x)/x
Record LengthDSO5202B: Maximum 1M samples per single-channel; maximum 512K samples per dual-channel (4K,40K optional)
SEC/DIV RangeDSO5202B: 2ns/div to 40s/div
Sample Rate and Delay Time AccuracyDSO5202B: ±50ppm （ at over any ≥1ms time interval)
Position RangeDSO5202B: 2ns/div to 8ns/div; (-8div x s/div) to 20ms; | DSO5102B: 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s
Delta Time Measurement Accuracy (Full Bandwidth)DSO5202B: Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns); >16 averages:± (1 sample interval + 100ppm × reading + 0.4ns); Sample interval = s/div ÷ 200
Vertical ResolutionDSO5202B: 8-bit resolution, all channel sampled simultaneously
Offset RangeDSO5202B: 2mV/div to 20mV/div, ±400mV; 50mV/div to 200mV/div, ±2V 500mV/div to 2V/div, ±40V; 5V/div to 10V/div , ±50V
BandwidthDSO5202B: 200MHz | DSO5102B: 100MHz | DSO5062B: 60MHz
Rise Time at BNC( typical)DSO5202B: 1.8ns | DSO5102B: 3.5ns | DSO5062B: 5.8ns
MathDSO5202B: +, -, *, /, FFT
FFTDSO5202B: Windows: Hanning, Flatop, Rectamgular, Bartlett, Blackman; 1024 sample point
Bandwidth LimitDSO5202B: 20MHz
Low Frequency Response (-3db)DSO5202B: ≤10Hz at BNC
DC Gain AccuracyDSO5202B: ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
DC Measurement Accuracy, Average Acquisition ModeDSO5202B: When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected; When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 10V/div
Volts Measurement Repeatability, Average Acquisition ModeDSO5202B: Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions
Trigger TypesDSO5202B: Edge, Video, Pulse, Slope, Over time, Alternative
Trigger SourceDSO5202B: CH1, CH2, EXT, EXT/5, AC Line
Trigger ModesDSO5202B: Auto, Normal, Single
Coupling TypeDSO5202B: DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity (Edge Trigger Type)DSO5202B: DC(CH1,CH2): 1div from DC to 10MHz; 1.5div from 10MHz to 100MHz; 2div from 100MHz to Full; DC(EXT): 200mV from DC to 100MHz; 350mV from 100MHz to 200MHz; DC(EXT/5): 1V from DC to 100MHz;1.75V from 100MHz to 200MHz; AC: Attenuates signals below 10Hz; HF Reject: Attenuates signals above 80kHz; LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 1
Trigger Level RangeDSO5202B: CH1/CH2: ±8 divisions from center of screen; EXT: ±1.2V; EXT/5:±6V
Set Level to 50%(typical)DSO5202B: Operates with input signals ≥50Hz
Video TriggerDSO5202B:
Video Trigger TypeDSO5202B: CH1, CH2: Peak-to-peak amplitude of 2 divisions; EXT: 400mV; EXT/5: 2V
Signal Formats and Field Rates, Video Trigger TypeDSO5202B: Supports NTSC, PAL and SECAM broadcast systems for any field or any line
Holdoff RangeDSO5202B: 100ns ~ 10s
Pulse Width TriggerDSO5202B:
Pulse Width Trigger ModeDSO5202B: Trigger when (< , >, = , or ≠); Positive pulse or Negative pulse
Pulse Width Trigger PointDSO5202B: Equal: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level. Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width. Less than: The trigger point is the trailing edge. Greater than (also called over
Pulse Width RangeDSO5202B: 20ns ~ 10s
Slope TriggerDSO5202B:
Slope Trigger ModeDSO5202B: Trigger when (< , > , = , or ≠ ); Positive slope or Negative slope
Slope Trigger PointDSO5202B: Equal: The oscilloscope triggers when the waveform slope is equal to the set slope. Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope. Less than: The oscilloscope triggers when the waveform slope is less than the set slope. Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.
Time RangeDSO5202B: 20ns ~ 10s
Overtime TriggerDSO5202B:
Over Time ModeDSO5202B: Rising edge or Falling edge
Alternative TriggerDSO5202B:
Trigger on CH1DSO5202B: Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger on CH2DSO5202B: Internal Trigger: Edge, Pulse Width, Video, Slope
Readout ResolutionDSO5202B: 6 digits
Accuracy (typical)DSO5202B: ±30ppm (including all frequency reference errors and ±1 count errors)
Frequency RangeDSO5202B: AC coupled, from 4Hz minimum to rated bandwidth
Signal SourceDSO5202B: Pulse Width or Edge Trigger modes: all available trigger sources The Frequency Counter measures trigger source at all times, including when the oscilloscope acquisition pauses due to changes in the run status, or acquisition of a single shot event has completed. Pulse Width Trigger mode: The oscilloscope counts pulses of significant magnitude inside the 1s measurement window that qualify
Cursor MeasurementDSO5202B: Voltage difference between cursors: △ V Time difference between cursors: △ T Reciprocal of △ T in Hertz (1/ΔT)
Auto MeasuermentDSO5202B: Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
Display TypeDSO5202B: 7 inch 64K color TFT (diagonal liquid crystal)
Display ResolutionDSO5202B: 800 horizontal by 480 vertical pixels
Display ContrastDSO5202B: Adjustable (16 gears) with the progress bar
Output Voltage( typical)DSO5202B: About 5Vpp into ≥1MΩ load
Frequency(typical)DSO5202B: 1kHz
Supply VoltageDSO5202B: 100-120VACRMS(±10%), 45Hz to 440Hz, CAT Ⅱ 120-240VACRMS(±10%), 45Hz to 66Hz, CAT Ⅱ
Power ConsumptionDSO5202B: <30W
FuseDSO5202B: 2A, T rating, 250V
TemperatureDSO5202B: Operating: 32 ℉ to 122 ℉ (0 ℃ to 50 ℃ ); Nonoperating: -40 ℉ to 159.8 ℉ (-40 ℃ to +71 ℃ )
Cooling MethodDSO5202B: Convection
HumidityDSO5202B: +104 ℉ or below (+40 ℃ or below): ≤90% relative humidity; 106 ℉ to 122 ℉ (+41 ℃ to 50 ℃ ): ≤60% relative humidity
AltitudeDSO5202B: Operating: Below 3,000m (10,000 feet); Nonoperaring: Below 15,000m(50,000 feet)
SizeDSO5202B: Length 385mm, Width 200mm, Height 245mm
WeightDSO5202B: 3.5KG(with Packing); 2.08KG(without Packing ）
HT300B,HT500BDescription: 350Mhz,500MHz,10:1/1:1 | View Manual: Download
HT-100B，HT-200BDescription: 100MHz,200MHz,10:1/1:1 | View Manual: Download
PP500BDescription: 500MHz,10:1/1:1 | View Manual: Download
PP-80,PP-150,PP-200Description: 60MHz,100MHz,200MHz,10:1/1:1 | View Manual: Download
PP80B, PP150B, PP200B, PP300BDescription: 80Mhz, 150MHz, 200MHz, 300MHz, 10:1/1:1 | View Manual: Download
PP-90Description: 80MHz,10:1/1:1 | View Manual: Download
T3100Description: 100MHz，100：1，2000VDC Peak AC | View Manual: Download
CC65Description: AC/DC: 0 – 20KHz，20mA to 65A DC | View Manual: Download
CC650Description: AC:0 – 5KHz，1A - 500A ，DC:1A - 650A | View Manual: Download