HANTEKOscilloscopes
Model: DSO2000
DSO2000 Series
Price:Price on Request
Cost-effective economy oscilloscope, 150MHz Bandwidth, 1GSa/s, 8M memory depth; with 1CH 25MHz waveform generator, support arbitrary waveform output; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter and 6-digit hardware frequency indicator functions; 2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, embedded systems, computers, research and education.
Key Specifications
BandwidthDSO2D15: 150MHz | DSO2D10: 100MHz | DSO2C15: 150MHz | DSO2C10: 100MHz
Oscilloscope channelsDSO2D15: 2CH | DSO2D10: 2CH | DSO2C15: 2CH | DSO2C10: 2CH
Waveform generatorDSO2D15: 1CH | DSO2D10: 1CH | DSO2C15: - | DSO2C10: -
Sample rateDSO2D15: 1GSa/s (single channel) 500MSa/s (two channels)
BandwidthDSO2D15: 150MHz | DSO2D10: 100MHz | DSO2C15: 150MHz | DSO2C10: 100MHz
Oscilloscope channelsDSO2D15: 2CH | DSO2D10: 2CH | DSO2C15: 2CH | DSO2C10: 2CH
Waveform generatorDSO2D15: 1CH | DSO2D10: 1CH | DSO2C15: - | DSO2C10: -
Sample rateDSO2D15: 1GSa/s (single channel) 500MSa/s (two channels)
NormalDSO2D15: Sample data
Peak-to-peak valueDSO2D15: Display high frequency and random burr
AverageDSO2D15: Average waveform, times: 4, 8, 16, 32, 64, 128
High resolutionDSO2D15: Up to 12bit
Input couplingDSO2D15: DC, AC, GND
Input impedanceDSO2D15: 1MΩ±2% ‖13pF±3pF
Probe attenuation factorDSO2D15: 1X, 10X, 100X, 1000X
Voltage ratingDSO2D15: 300V CAT II
Maximum input voltageDSO2D15: 300VRMS (10X)
Waveform interpolationDSO2D15: (sin x)/x
Maximum record lengthDSO2D15: Single channel maximum 8M
Horizontal scale rangeDSO2D15: 2ns/div~100s/div 1, 2, 5 step by step
Time base modeDSO2D15: Y-T, X-Y, Roll
Zero offsetDSO2D15: ±0.5 div×minimum time base gear
Sample Rate and Delay Time AccuracyDSO2D15: ±25ppm
ModelDSO2D15: DSO2D15 | DSO2D10: DSO2D10 | DSO2C15: DSO2C15 | DSO2C10: DSO2C10
Rising time in BNC position (typical)DSO2D15: 2.4ns | DSO2D10: 3.5ns | DSO2C15: 2.4ns | DSO2C10: 3.5ns
Vertical resolutionDSO2D15: 8 bits resolution, each channel samples simultaneously
Vertical sensitivityDSO2D15: 2mV/div to 10V/div
Offset rangeDSO2D15: ≥ 200mV/div, ±1V;
Mathematical operationDSO2D15: +, -, ×, ÷, FFT
FFTDSO2D15: Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop
Bandwidth LimitDSO2D15: 20MHz
Bass response（-3db）DSO2D15: In BNC position ≤ 10Hz
Vertical gain accuracyDSO2D15: In ''normal'' or ''average'' acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%;
Trigger typeDSO2D15: Edge, Pulse width, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
Trigger level rangeDSO2D15: ±5 divisions from the center of the screen
Trigger modeDSO2D15: Auto, Normal, single
LevelDSO2D15: CH1~CH2 | DSO2D10: ±4 divisions from the center of the screen
EXT (Only With AWG Model)DSO2D15: 0~3.3V
Holdoff rangeDSO2D15: 8ns~10s
Trigger level accuracyDSO2D15: CH1~CH2 | DSO2D10: 0.2 div×volts/div within ±4 divisions from the center of the screen
Edge triggerDSO2D15: Slope | DSO2D10: Rising edge, falling edge, rising or falling edge
Signal sourceDSO2D15: CH1, CH2, EXT (Only With AWG Model)
Pulse width triggerDSO2D15: Polarity | DSO2D10: Positive polarity, negative polarity
Condition(When)DSO2D15: <, >, !=, =
Pulse width rangeDSO2D15: 8ns ~ 10s
AccuracyDSO2D15: 8ns
Video triggerDSO2D15: Signal standard | DSO2D10: NTSC, PAL
SynchronizationDSO2D15: Scanning line, line number, odd field, even field, all field
Slope triggerDSO2D15: Slope | DSO2D10: rising, falling
Time rangeDSO2D15: 8ns ~ 10s
Overtime triggerDSO2D15: Signal source | DSO2D10: CH1~CH2，
PolarityDSO2D15: Positive polarity, negative polarity
Window triggerDSO2D15: Signal source | DSO2D10: CH1~CH2
Pattern triggerDSO2D15: Pattern | DSO2D10: 0: low level; 1: high level; X: ignore
Level（signal source）DSO2D15: CH1~CH2
Interval triggerDSO2D15: Slope | DSO2D10: rising, falling
Under Amp triggerDSO2D15: Polarity | DSO2D10: Positive polarity, negative polarity
UART triggerDSO2D15: Condition(When) | DSO2D10: Start, Stop, data, Parity ERR, COM ERR
Signal source(RX/TX)DSO2D15: CH1~CH2
Data formatDSO2D15: Hex (hexadecimal)
Data lengthDSO2D15: 1 byte
Data bit widthDSO2D15: 5 bit, 6 bit, 7 bit, 8 bit
Odd-even checkDSO2D15: none, odd, even
Idle levelDSO2D15: high, low
Baud rate (optional)DSO2D15: 110/300/600/1200/2400/4800/9600/14400/19200/38400/57600/115200/230400/380400/460400 bit/s
Baud rate(user-defined)DSO2D15: 300bit/s~334000bit/s
LIN triggerDSO2D15: Condition(When) | DSO2D10: Interval field, synchronization field, ID field, synchronization error, identifier, ID and data
CAN triggerDSO2D15: Condition(When) | DSO2D10: Start bit, remote frame ID, data frame ID, frame ID, data frame data, error frame, all errors, ACK Error, overload frame
SPI triggerDSO2D15: Signal source | DSO2D10: CH1~CH2
IIC triggerDSO2D15: Signal source (SDA/SCL) | DSO2D10: CH1~CH2
Data indexDSO2D15: 0~7
When(condition)DSO2D15: Start bit, stop bit, No Ack, address, restart, address and data
CursorDSO2D15: Voltage difference between cursors △V
Auto measurementDSO2D15: frequency, period, mean, peak-to-peak, RMS, minimum, mixmum, rising time, falling time, + width, - width, base, top, middle, amplitude, overshoot, preshoot, rising edge phase difference, falling edge phase difference, + duty, - duty, period mean, PRMS, FOVshoot, ROVshoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
DVMDSO2D15: Data source | DSO2D10: CH1, CH2
Measurement typeDSO2D15: DC RMS
Frequency meterDSO2D15: hardware 6 bits frequency meter
ChannelDSO2D15: 1
Maximum frequencyDSO2D15: 25 MHz
Standard waveformsDSO2D15: sine, square, ramp,Exp, noise, DC
Arbitrary waveformDSO2D15: Arb1, Arb2, Arb3, Arb4
SinDSO2D15: Frequency range | DSO2D10: 0.1Hz~25MHz
Square/pulseDSO2D15: Frequency range | DSO2D10: 0.1Hz~10MHz
Triangular waveDSO2D15: Frequency range | DSO2D10: 0.1Hz~1MHz